8/3/2023 0 Comments Hoe to update bassbox pro 6![]() You won't go much higher than this even with a horn because the roll off is related to the drivers inductance.Īnd you get the bonuses of a sealed box of predictable behavior + easy integration to system, and Qts=0.7 should give decent transients/general good behavior. Displacement is tiny there so if you wan't to EQ up the signal and have the amplifier headroom to do so then you can. Stick a wide notch filter at ~400Hz to personal taste and cross over to your next box around 800-1000hz. ![]() ![]() ![]() I'd make the 4 sealed 10L boxes because they'll be quick and simple compared to horns, you probably don't need the extra horn SPL. At that point you have to ask yourself do you need more SPL? And if not do you need horns? Ofc there will be power compression and all sorts of non ideal effects to account for in the real world but 130dB+ is pretty damn loud. Add 12dB to this for going up to 4 enclosures (4xpower/drivers) and you will be seeing ~130dB for a set of 4 cabs. Fc is 150Hz and it's about 5db down there compared to centre of passband (121dB). This is a sim of the driver in 10L box, half space, 400W. A horn is a possibility, but like you say not the easiest things to design well if you've never attempted one before. It'll quite possibly make properly integrating to the subs under harder due to the additional port output. ![]() Thing is if you're wanting this as a 150Hz and upwards box that integrates to subs under it, you don't really want to port it imo. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |